by

Hp Ilo Demo License Previously Installed

Built in cards like Dell DRAC or HP iLO (Integrated Lights-Out Management.). And install iLO 4 Firmware Version 1.32 (or later). From HP Integrated Lights-Out. My Trial key for Advanced features (like Virtual Media) seems working multiples times on different servers, thanks HP! License Key for a 60 day Trial.

Results of ilo 2 license key generator: Free download software, Free Video dowloads, Free Music downloads, Free Movie downloads, Games. Hp Ilo 3 License Keygen. HPE Integrated Lights Out (iLO) License Key Installation Instructions. A Hewlett Packard Enterprise iLO license. HPE iLO functions out-of-the-box without. HP Proliant DL160 G5 - how to remove ILO License. Ask Question. People reuse, recycle and steal/pirate the keys all the time. If it's already installed on this server, you may as well use it. You don't really need to remove the ILO license. Nobody is going to care, and HP isn't interested in auditing the license status of such an old.

This section documents the MessageID values that may be returned in ExtendedError responses to HTTP operations.

Base.0.10.AccessDenied

While attempting to access, connect to, or transfer to/from another resource, the service was denied access.

Severity: Critical

Resolution: Verify that the URI is correct and that the service has the appropriate credentials.

Base.0.10.AccountForSessionNoLongerExists

The account for current session is removed and the current session is also removed.

Severity: OK

Resolution: Attempt to connect using a valid account.

Base.0.10.AccountModified

The account was modified successfully.

Severity: OK

Resolution: None.

Base.0.10.ActionNotSupported

The action supplied in the POST operation is not supported by the resource.

Severity: Critical

Resolution: The action was invalid or the wrong resource was the target. See the implementation documentation for assistance.

Base.0.10.ActionParameterDuplicate

The action was submitted with a duplicate parameter in the request body.

Severity: Warning

Resolution: Resubmit the action with only one instance of the parameter in the request body.

Base.0.10.ActionParameterMissing

The requested action is missing a parameter that is required to process the action.

Severity: Critical

Resolution: Resubmit the action with the required parameter in the request body.

Base.0.10.ActionParameterNotSupported

The action parameter is not supported on the target resource.

Severity: Warning

Resolution: If the operation did not complete, remove the parameter and resubmit the request.

Base.0.10.ActionParameterUnknown

An action was submitted, but a supplied parameter did not match any of the known parameters.

Severity: Warning

Resolution: If the operation did not complete, correct the invalid parameter and resubmit the request.

Base.0.10.ActionParameterValueFormatError

The value type is correct, but the format is not supported or the size/length is exceeded

Severity: Warning

Resolution: If the operation did not complete, correct the parameter value in the request body and resubmit the request.

Base.0.10.ActionParameterValueTypeError

The parameter contains an incorrect value type. For example, a number value for a string parameter type.

Severity: Warning

Resolution: If the operation did not complete, correct the parameter value in the request body and resubmit the request.

Base.0.10.CouldNotEstablishConnection

An attempt to access the resource, image, or file at the URI was unsuccessful because a session could not be established.

Severity: Critical

Resolution: Verify that the URI contains a valid and reachable node name, protocol information, and other URI components.

Now run the install option and install the software 7. Epson printer adjustment program.

Base.0.10.CreateFailedMissingReqProperties

A create operation was attempted on a resource, but a required property was missing from the request.

Severity: Critical

Resolution: If the operation did not complete, include the required property with a valid value in the request body and resubmit the request.

Base.0.10.CreateLimitReachedForResource

No more resources can be created.

Severity: Critical

Resolution: If the operation did not complete, delete resources and resubmit the request.

Base.0.10.Created

The resource has been created successfully.

Severity: OK

Resolution: None

Base.0.10.EventSubscriptionLimitExceeded

The event subscription establishment has been requested, but the operation did not complete because the number of simultaneous subscriptions exceeded the maximum number allowed by the implementation.

Severity: Critical

Resolution: Before attempting to establish the event subscription, reduce the number of subscriptions or increase the maximum number of simultaneous subscriptions allowed (if supported).

Base.0.10.InsufficientPrivilege

The account or credentials associated with the current session are not authorized to perform the requested operation.

Severity: Critical

Resolution: Retry the operation with an authorized account or credentials.

Base.0.10.InternalError

The request did not complete due to an unknown internal error, but the service is still operational.

Severity: Critical

Resolution: Resubmit the request. If the problem persists, consider resetting the service.

Base.0.10.InvalidObject

The object is not valid.

Severity: Critical

Resolution: If the operation did not complete, the object is malformed or the URI is incorrect. Make the appropriate corrections and resubmit the request.

Base.0.10.MalformedJSON

The request body contains malformed JSON.

Severity: Critical

Resolution: Verify that the request body is valid JSON and resubmit the request.

Base.0.10.NoValidSession

The operation did not complete because a valid session is required in order to access resources.

Severity: Critical

Resolution: Establish a session before attempting any operations.

Base.0.10.PropertyDuplicateA duplicate property is in the request body.Severity: WarningResolution: If the operation did not complete, remove the duplicate property from the request body and resubmit the request.

Base.0.10.PropertyMissing

The request does not include a required property.

Severity: Warning

Resolution: If the operation did not complete, verify the property is in the request body and has a valid value.

Base.0.10.PropertyNotWritable

The request included a value for a read-only property.

Severity: Warning

Resolution: If the operation did not complete, remove the property from the request body and resubmit the request.

Base.0.10.PropertyUnknown

An unknown property is in the request body.

Severity: Warning

Resolution: If the operation did not complete, remove the unknown property from the request body and resubmit the request.

Base.0.10.PropertyValueFormatError

The value type is correct, but the format is not supported or the size/length is exceeded.

Severity: Warning

Resolution: If the operation did not complete, correct the property value in the request body and resubmit the request.

Base.0.10.PropertyValueNotInList

The value type is correct, but the value is not supported.

Severity: Warning

Resolution: If the operation did not complete, choose a value from the enumeration list and resubmit your request.

Base.0.10.PropertyValueTypeError

The property value contains an incorrect property type. For example, a number value for a string property type.

Severity: Warning

Resolution: If the operation did not complete, correct the property value in the request body and resubmit the request.

Base.0.10.QueryNotSupported

The query is not supported by the implementation.

Severity: Warning

Resolution: If the operation did not complete, remove the query parameter and resubmit the request.

Base.0.10.QueryNotSupportedOnResource

The query is not supported on the resource. For example, a start/count query is attempted on a resource that is not a collection.

Severity: Warning

Resolution: If the operation did not complete, remove the query parameters and resubmit the request.

Base.0.10.QueryParameterOutOfRange

The query parameter value is out of range for the resource. For example, a page is requested that is outside the valid page range.

Severity: Warning

Resolution: Specify a query parameter value that is within range. For example, a page that is within the valid range of pages.

Base.0.10.QueryParameterValueFormatError

The value type is correct, but the format is not supported or the size/length was exceeded.

Severity: Warning

Resolution: If the operation did not complete, correct the value for the query parameter in the request body and resubmit the request.

Base.0.10.QueryParameterValueTypeError

The query parameter contains an incorrect value type. For example, a number supplied for a query parameter that requires a string.

Severity: Warning

Resolution: If the operation did not complete, correct the value for the query parameter in the request body and resubmit the request.

Base.0.10.ResourceAlreadyExists

The create resource operation did not complete because the resource already exists.

Severity: Critical

Resolution: Do not attempt the create operation because the resource already exists.

Base.0.10.ResourceAtUriInUnknownFormat

The URI is valid, but the resource or image at that URI is in a format that is not supported by the service.

Severity: Critical

Resolution: Place a resource, image, or file that is supported by the service at the URI.

Base.0.10.ResourceAtUriUnauthorized

An attempt to access the resource, image, or file at the URI is unauthorized.

Severity: Critical

Resolution: Verify that the appropriate access is provided for the service to access the URI.

Base.0.10.ResourceCannotBeDeleted

A delete operation was attempted on a resource that cannot be deleted.

Severity: Critical

Resolution: Do not attempt to delete a resource that does not support the REST API DELETE operation.

Base.0.10.ResourceInUse

The request to change the resource was rejected because the resource was in use or in transition.

Severity: Warning

Resolution: If the operation did not complete, wait until the resource is free and resubmit the request.

Base.0.10.ResourceMissingAtURI

The operation expected an image or resource at the provided URI, but found none.

Severity: Critical

Resolution: Place a valid resource at the URI or correct the URI and resubmit the request.

Base.0.10.ServiceInUnknownState

The operation did not complete because the service is in an unknown state and cannot take incoming requests.

Severity: Critical

Resolution: If the operation did not complete, restart the service and resubmit the request.

Base.0.10.ServiceShuttingDown

The operation did not complete because the service is shutting down.

Severity: Critical

Resolution: If the operation did not complete, resubmit the request when the service is available.

Base.0.10.ServiceTemporarilyUnavailable

The service is temporarily unavailable.

Severity: Critical

Resolution: Wait for the indicated retry duration and retry the operation.

Base.0.10.SessionLimitExceeded

Session establishment has been requested, but the operation did not complete because the number of simultaneous sessions exceeded the maximum number allowed by the implementation.

Severity: Critical

Resolution: Before attempting to establish the session, reduce the number of sessions or increase the maximum number of simultaneous sessions allowed (if supported).

Base.0.10.SourceDoesNotSupportProtocol

While attempting to access, connect to, or transfer from another location, the other end of the connection did not support the specified protocol.

Severity: Critical

Resolution: Change protocols or URIs.

Base.0.10.Success

The operation completed successfully.

Severity: OK

Resolution: None

Base.0.10.UnrecognizedRequestBody

The service detected a request body with malformed JSON.

Severity: Warning

Resolution: If the operation did not complete, correct the request body and resubmit the request.

HpCommon.0.10.ArrayPropertyOutOfBound

The items in the array exceed the maximum number supported.

Severity: Warning

Resolution: Retry the operation using the correct number of items for the array.

HpCommon.0.10.ConditionalSuccess

A property value was successfully changed but the change may be reverted upon system reset.

Severity: Warning

Resolution: Check the 'SettingsResult' messages after the system has reset for errors referring to the corresponding property.

HpCommon.0.10.InternalErrorWithParam

The operation was not successful due to an internal service error (shown), but the service is still operational.

Severity: Critical

Resolution: Retry the operation. If the problem persists, consider resetting the service.

HpCommon.0.10.InvalidConfigurationSpecified

The specified configuration is not valid.

Severity: Warning

Resolution: Correct the configuration, and then retry the operation.

HpCommon.0.10.PropertyValueExceedsMaxLength

The value for the property exceeds the maximum length.

Severity: Warning

Resolution: Correct the value for the property in the request body, and then retry the operation.

HpCommon.0.10.PropertyValueIncompatible

The value for the property is the correct type, but this value is incompatible with the current value of another property.

Severity: Warning

Resolution: Correct the value for the property in the request body, and then retry the operation.

HpCommon.0.10.PropertyValueOutOfRange

The value for the property is out of range.

Severity: Warning

Resolution: Correct the value for the property in the request body, and then retry the operation.

HpCommon.0.10.ResetInProgress

A device or service reset is in progress.

Severity: Warning

Resolution: Wait for device or service reset to complete, and then retry the operation.

HpCommon.0.10.ResetRequired

One or more properties were changed, but these changes will not take effect until the device or service is reset.

Severity: Warning

Resolution: To enable the changed properties, reset the device or service.

HpCommon.0.10.ResourceNotReadyRetry

The resource is present but is not ready to perform operations due to an internal condition such as initialization or reset.

Severity: Warning

Resolution: Retry the operation when the resource is ready.

HpCommon.0.10.SuccessFeedback

The operation completed successfully

Severity: OK

Resolution: None

HpCommon.0.10.TaskCreated

A task was created in response to the operation.

Severity: OK

Resolution: Perform an HTTP GET request on the supplied URI for task status.

HpCommon.0.10.UnsupportedHwConfiguration

A previously requested property value change was reverted because the current hardware configuration does not support it.

Severity: Warning

Resolution: Ensure that the system's hardware configuration supports the property value.

iLO.0.10.AHSDisabled

Modifying AHS properties is not possible with AHS disabled.

Severity: Warning

Resolution: Enable AHS, and then modify the AHS properties.

iLO.0.10.Accepted

Indicates that one or more properties were correctly changed, but may not be in effect yet.

Severity: OK

Resolution: None

iLO.0.10.ActionParameterValueNotInList

Indicates that the correct value type was supplied for the action parameter, but the value is not supported. (The value is not in the enumeration list.)

Severity: Warning

Resolution: Choose a value from the enumeration list and resubmit the request if the operation failed.

iLO.0.10.AlertMailFeatureDisabled

AlertMail feature is disabled.

Severity: Warning

Resolution: Enable AlertMail feature to send test alert message.

iLO.0.10.ArrayPropertyOutOfBound

The number of items in the array exceeds the maximum number supported.

Severity: Warning

Resolution: Retry the operation using the correct number of items for the array.

iLO.0.10.CannotRemoveLicense

Cannot remove iLO Standard/iLO Standard for BladeSystem license.

Severity: Warning

Resolution: None.

iLO.0.10.DemoLicenseKeyPreviouslyInstalled

A demo license was previously installed.

Severity: Warning

Resolution: None.

iLO.0.10.DeviceResetRequired

Indicates that one or more properties were correctly changed, but will not take effect until device is reset.

Severity: Warning

Resolution: Reset the device for the settings to take effect.

iLO.0.10.DiagsTestAlreadyRunning

A diagnostics self test is already running.

Severity: Warning

Resolution: Stop the running test and try again.

iLO.0.10.ESKMServersNotConfigured

Enterprise Secure Key Manager Servers are not configured.

Severity: OK

Resolution: None.

iLO.0.10.ETagTooLong

The supplied ETag is too long. The maximum supported ETag length is 63 bytes.

Severity: Warning

Resolution: Retry the operation using an ETag with a length of 63 bytes or less.

iLO.0.10.EmptyDNSName

DNS name is empty.

Severity: Warning

Resolution: Retry the request with a valid DNS name.

iLO.0.10.ErrorIntializingESKM

Failed to initialize ESKM.

Severity: Warning

Resolution: Check if Account Group, Local CA Certificate Name, Login Name and Password are correct and try again.

iLO.0.10.EventLogCleared

Event log cleared successfully.

Severity: OK

Resolution: None.

iLO.0.10.EventSubscriptionModified

The event subscription was modified successfully.

Severity: OK

Resolution: None.

iLO.0.10.EventSubscriptionRemoved

The event subscription was removed successfully.

Severity: OK

Resolution: None.

iLO.0.10.ExtendedInfo

Indicates that extended information is available.

Severity: OK

Resolution: See @Message.ExtendedInfo for more information.

iLO.0.10.FWFlashSuccessTPMOverrideEnabled

A Trusted Platform Module is installed in the system and TPMOverrideFlag is enabled. Firmware flash initiated.

Severity: OK

Resolution: None.

iLO.0.10.FWFlashSuccessTrustedModuleOverrideEnabled

A Trusted Module (type unspecified) is installed in the system and TPMOverrideFlag is enabled. Firmware flash initiated.

Severity: OK

Resolution: None.

iLO.0.10.FWFlashTPMOverrideFlagRequired

A Trusted Platform Module is installed in the system, TPMOverrideFlag is required for firmware flash to proceed.

Severity: Warning

Resolution: Please set the TPMOverrideFlag to true and try again.

iLO.0.10.FWFlashTrustedModuleOverrideFlagRequired

A Trusted Module (type unspecified) is installed in the system, TPMOverrideFlag is required for firmware flash to proceed.

Severity: Warning

Resolution: Please set the TPMOverrideFlag to true and try again.

iLO.0.10.FirmwareFlashAlreadyInProgress

A firmware upgrade operation is already in progress.

Severity: Warning

Resolution: Wait for the current firmware flash to complete, and then retry the operation.

iLO.0.10.GeneratingCertificate

Generating the X509 Certificate.

Severity: OK

Resolution: None.

iLO.0.10.ICRUNotSupported

ICRU feature or function is not supported on the system.

Severity: Warning

Resolution: None.

iLO.0.10.IPv6ConfigurationError

The specified IPv6 configuration caused an error.

Severity: Warning

Resolution: Resolve the indicated error in the configuration data.

iLO.0.10.ImportCertSuccessfuliLOResetinProgress

Import Certificate was successful hence iLO needs to be reset. So automatic iLO reset is performed to enable the new certificate.

Severity: Warning

Resolution: None.

iLO.0.10.ImportCertificateFailed

Failed importing Certificate.

Severity: Warning

Resolution: Retry the operation with proper Certificate information.

iLO.0.10.ImportSSOParamError

Not a valid parameter.

Severity: Warning

Resolution: Retry the request with valid parameters.

iLO.0.10.ImportSSOUriError

Not a valid Uri to import SSO certificate.

Severity: Warning

Resolution: Retry the request with valid URI.

iLO.0.10.IndicatorLedInvalidStateChange

The request to change the state of the Indicator LED cannot be granted because the current state is either Blinking or is Unknown.

Severity: Warning

Resolution: Please wait until the server has completed its reserved state.

iLO.0.10.InternalErrorWithParam

The operation was not successful due to an internal service error (shown), but the service is still operational.

Severity: Critical

Resolution: Retry the operation. If the problem persists, consider resetting the service.

iLO.0.10.InvalidConfigurationSpecified

The specified configuration is not valid.

Severity: Warning

Resolution: Correct the configuration, and then retry the operation.

iLO.0.10.InvalidConfigurationSpecifiedForFederation

iLO Federation Management cannot be supported in the current configuration.

Severity: Warning

Resolution: Review the iLO network settings or Onboard Administrator settings and refer to the iLO User Guide.

iLO.0.10.InvalidEngineID

EngineID should be a hexadecimal number starting with 0x (for example, 0x0102030405abcdef). The string length should be an even number, greater than or equal to 6 characters (excluding the '0x'), and less than or equal to 32 characters.

Severity: Warning

Resolution: Retry the operation using an EngineID within the specified parameters.

iLO.0.10.InvalidIndex

The Index is not valid.

Severity: Warning

Resolution: Adhere to the indexes supported in the self links.

iLO.0.10.InvalidLicenseKey

The license key is not valid.

Severity: Warning

Resolution: Retry the operation using a valid license key.

iLO.0.10.InvalidOperationForAutoPowerOnState

The operation was not successful because the current auto power on mode specifies power is to remain off.

Severity: Warning

Resolution: Verify that the system auto power on mode is set to turn power on or follow the previous power setting.

iLO.0.10.InvalidOperationForSystemState

The operation was not successful due to the current power state (for example, attempting to turn the power off when it is already off).

Severity: Warning

Resolution: Verify that the system is in the correct power state, and then retry the operation.

iLO.0.10.InvalidPassphraseLength

The passphrase must contain 8 to 49 characters.

Severity: Warning

Resolution: Correct the passphrase, and then retry the operation.

iLO.0.10.InvalidPasswordLength

The password length is not valid.

Severity: Critical

Resolution: Retry the operation using a corrected password.

<iLO.0.10.LicenseKeyNotSupported

The use of a license key is not supported on this system.

Severity: Warning

Resolution: None.

iLO.0.10.LicenseKeyRequired

An iLO license key is required to use this operation or feature.

Severity: Warning

Resolution: Install a license key (Advanced or Scale Out) to use this feature.

iLO.0.10.LoginAttemptDelayed

The login was not successful, so the service enforces a delay before another login is allowed.

Severity: Warning

Resolution: Wait for the delay time to expire, and then retry the login.

iLO.0.10.LoginAttemptDelayedSeconds

The login was not successful, so the service enforces a delay before another login is allowed.

Severity: Warning

Resolution: None.

iLO.0.10.MaxProviders

The maximum number of providers are already registered.

Severity: Warning

Resolution: None.

iLO.0.10.MaxVirtualMediaConnectionEstablished

No more Virtual Media connections are available, because the maximum number of connections are already established.

Severity: Warning

Resolution: Close an established Virtual Media connection, and then retry creating or opening another connection.

iLO.0.10.MembistVariablesNotSupported

Membist variables are not supported on the system.

Severity: Warning

Resolution: None.

iLO.0.10.NoEventSubscriptions

There are no event subscriptions registerd.

Severity: Warning

Resolution:

iLO.0.10.NoPowerMetering

No support for power metering available on platform.

Severity: OK

Resolution: Enable Power Metering on platform if supported.

iLO.0.10.NoSNMPAlertDestinationsConfigured

No SNMP alert destinations are configured.

Severity: Warning

Resolution: Disable SNMP pass-thru, modify the property, and then re-enable SNMP pass-thru.

iLO.0.10.NoSamples

No power history samples are available.

Severity: OK

Resolution: To accumulate power history samples, power on the server, and then wait at least 5 minutes.

iLO.0.10.NoSpaceforDNSName

No space to store DNS name.

Severity: Warning

Resolution: Make sure SSO database has enough space to store DNS name.

iLO.0.10.NoVirtualMediaConnectionAvailable

No Virtual Media connections exist to perform the operation.

Severity: Warning

Resolution: Create or open a Virtual Media connection, and then retry the operation.

iLO.0.10.NotSupportedOnNIC

This property is not supported by the indicated network port.

Severity: Warning

Resolution: Do not specify this property on the indicated network port.

iLO.0.10.NotValidIPAddrOrDNS

The value for the property is not a valid IPv4/v6 address or DNS name.

Severity: Warning

Resolution: Correct the IPv4/v6 address or DNS name, and then retry the operation.

iLO.0.10.NotValidIPAddress

The value for the property is not a valid IP address.

Severity: Warning

Resolution: Use a valid IP address.

iLO.0.10.NotValidSubnetMask

The value for the property is not a valid subnet mask.

Severity: Warning

Resolution: Use a valid subnet mask.

iLO.0.10.PowerCapOACntrld

The enclosure Onboard Administrator is currently managing the power cap.

Severity: Warning

Resolution: Use Onboard Administrator to Manage the PowerCap

iLO.0.10.PowerCapROMCntrld

The System ROM is currently managing the power cap.

Severity: Warning

Resolution: Enable HP RESTful API management of the power cap in System ROM

iLO.0.10.PowerValueBadParam

The power cap value is not valid.

Severity: Warning

Resolution: Retry the operation using a corrected value.

iLO.0.10.PowerValueInvalidCalibrationData

The request to set the power cap failed. Invalid power cap calibration data. The Power Cap feature is currently unavailable.

Severity: Warning

Resolution: Restart the server to retrieve calibration data from initial POST.

iLO.0.10.PowerValueNotOptimal

Power caps set for less than 50% of the difference between maximum and minimum power may become unreachable due to changes in the server. Power caps set for less than 20% are not recommended.

Severity: Warning

Resolution: Please provide an optimal value in integer considering the power cap range.

iLO.0.10.PowerValueUnAvailable

Advanced power capping is not currently available due to the system configuration or state.

Severity: Warning

Resolution: Change the system configuration or wait for the system to become fully initialized, and then retry the operation.

iLO.0.10.PowerValueUnSupported

Advanced power capping is not supported on this system.

Severity: Warning

Resolution: None.

iLO.0.10.PrimaryESKMServerAccessible

Only the primary ESKM server is accessible.

Severity: OK

Resolution: None.

iLO.0.10.PrimarySecondaryAddressesResolveToSameServer

Primary and secondary ESKM server addresses resolve to the same server.

Severity: OK

Resolution: None.

iLO.0.10.PrimarySecondaryESKMServersAccessible

Both primary and secondary ESKM servers are accessible.

Severity: OK

Resolution: None.

iLO.0.10.PropertyValueBadParam

The property value is not valid.

Severity: Warning

Resolution: Retry the operation using a corrected value.

iLO.0.10.PropertyValueExceedsMaxLength

The value for the property exceeds the maximum length.

Severity: Warning

Resolution: Correct the value for the property in the request body, and then retry the operation.

iLO.0.10.PropertyValueIncompatible

The value for the property is the correct type, but this value is incompatible with the current value of another property.

Severity: Warning

Resolution: Correct the value for the property in the request body, and then retry the operation.

iLO.0.10.PropertyValueOutOfRange

The value for the property is out of range.

Severity: Warning

Resolution: Correct the value for the property in the request body, and then retry the operation.

iLO.0.10.PropertyValueRequired

Indicates that a property was required but not specified.

Severity: Warning

Resolution: Include the required property in the request body and then retry the operation.

iLO.0.10.RepairNotSupported

IML event with this severity is not supported to be repaired. IML events with Critical or Warning severities can marked as repaired.

Severity: Warning

Resolution: Please do not try to repair IML events with severity other than Critical or Warning.

iLO.0.10.RequiredPropertyMissing

Indicates that a required property is not specified.

Hp Ilo Demo License Previously Installed

Severity: Warning

Resolution: Include the required property in the request body and then retry the operation.

iLO.0.10.ResetInProgress

An iLO reset is in progress.

Severity: Warning

Resolution: Wait for iLO reset to complete, and then retry the operation.

iLO.0.10.ResetRequired

One or more properties were changed, but these changes will not take effect until the iLO is reset.

Severity: Warning

Resolution: To enable the changed properties, reset the iLO.

iLO.0.10.ResourceBeingFlashed

The change to the requested resource failed because the resource is being flashed.

Severity: Warning

Resolution: Retry the operation when the firmware upgrade has completed.

iLO.0.10.ResourceInUseWithDetail

The change could not be made because the resource was in use or in a transitioning state.

Severity: Warning

Resolution: Retry the request.

iLO.0.10.ResourceTemporarilyUnavailable

The resource is temporarily unavailable because the firmware is being flashed.

Severity: Warning

Resolution: Retry the operation when the firmware upgrade has completed.

iLO.0.10.SMBIOSRecordNotFound

The SMBIOS record type is not found or is not supported on the system.

Severity: Warning

Resolution: Reset the system to update the SMBIOS records. If the problem persists then the SMBIOS record type is not supported.

iLO.0.10.SNMPAgentlessEnabled

Modifying SNMP properties is not possible while SNMP is configured in Agentless mode.

Severity: Warning

Resolution: Disable Agentless mode, modify the properties, and then re-enable Agentless mode.

iLO.0.10.SNMPAlertDisabled

The operation could not be completed because SNMP alerts are disabled.

Severity: Warning

Cisco Uccx Demo License

Resolution: Enable SNMP alerts and retry the operation.

iLO.0.10.SNMPDisabled

Modifying SNMP properties is not possible with SNMP disabled.

Severity: Warning

Resolution: Enable SNMP, and then modify the SNMP properties.

iLO.0.10.SNMPPassthruEnabled

Modifying SNMP properties is not possible while SNMP is configured in pass-thru mode.

Severity: Warning

Resolution: Configure SNMP 'Agentless' mode, modify the property, and then re-configure SNMP for 'Passthru' mode.

iLO.0.10.SNMPTestAlertFailed

The SNMP Test Alert did not send successfully.

Severity: Warning

Resolution: Verify the test alert content and retry.

iLO.0.10.SNTPConfigurationManagedByDHCPAndIsReadOnly

SNTP configuration is currently managed by DHCP and is therefore read-only.

Severity: Warning

Resolution: Disable SNTP configuration options in both DHCPv4 and DHCPv6 (see /Managers/n/NICs), and then reconfigure SNTP as desired with static settings.

iLO.0.10.SSOCertficateEmpty

SSO Certificate is Empty.

Severity: Warning

Resolution: None.

iLO.0.10.SSOCertificateReadError

SSO Certificate Read Error.

Severity: Warning

Resolution: Retry the request with valid SSO certificate.

iLO.0.10.SSONoSpaceError

No space to store SSO certificate.

Severity: Warning

Resolution: Make sure SSO database has enough space to store SSO certificate.

iLO.0.10.SSORecordNotFound

SSO Record Not Found.

Severity: Warning

Resolution: None.

iLO.0.10.SecondaryESKMServerAccessible

Only the secondary ESKM server is accessible.

Severity: OK

Resolution: None.

iLO.0.10.SuccessFeedback

The operation completed successfully.

Severity: OK

Resolution: None

iLO.0.10.SyslogFeatureDisabled

Remote Syslog feature is disabled.

Severity: Warning

Resolution: Enable remote syslog feature to send test syslog message.

iLO.0.10.SystemResetRequired

The system properties were correctly changed, but will not take effect until the system is reset.

Severity: Warning

Resolution: Reset system for the settings to take effect.

iLO.0.10.TokenRequired

Proper 'X-HPRESTFULAPI-AuthToken' authorization token not provided.

How

Severity: Critical

Resolution: Create proper 'X-HPRESTFULAPI-AuthToken' authorization token. Send token in using the proper HTTP header.

iLO.0.10.UnableModifyRights

Unable to modify user rights.

Severity: Warning

Resolution: None.

iLO.0.10.UnableToModifyDueToMissingComponent

The value for the property cannot be changed because a related hardware component is not installed.

Severity: Warning

Resolution: Install the hardware component and retry the operation.

iLO.0.10.UnableToModifyDuringSystemPOST

The value for the property cannot be changed while the computer system BIOS is in POST.

Severity: Warning

Resolution: After the computer system is either fully booted or powered off, retry the operation.

iLO.0.10.UnauthorizedLoginAttempt

The login was not successful, because the supplied credentials could not be authorized.

Severity: Warning

Resolution: Log in with authorized user name and password credentials.

iLO.0.10.UnsupportedOperation

This operation is not supported by RIS for the current system.

Severity: Warning

Resolution: None.

iLO.0.10.UnsupportedOperationInLegacyBootMode

State Of Ct Demo License

This operation is not supported when the system Boot Mode is set to Legacy BIOS.

Severity: Warning

Resolution: Change the Boot Mode to UEFI and retry the operation.

iLO.0.10.UnsupportedOperationInSystemBIOS

This operation is not supported by the current version of the system BIOS.

Severity: Warning

Resolution: None.

iLO.0.10.UserAlreadyExist

The user or login user name already exists.

Severity: Warning

Resolution: Try a different user or login user name.

iLO.0.10.UserNameAlreadyExists

Duplicate SNMPv3 User.

Severity: Warning

Resolution: Enter a different name and try again.

iLOEvents.0.9.AdapterConfigurationChange

Severity: Ok

Resolution: None

iLOEvents.0.9.CorrectableOrUncorrectableMemoryErrors

Correctable or uncorrectable Memory Errors Detected. Correctable errors have been corrected, but the memory module should be replaced. Value 0 for CPU means memory is not Processor based.

Severity: Warning

Resolution: Replace the failing memory module.

iLOEvents.0.9.DeviceDiscoveryStatus

The server device discovery status has changed.

Severity: OK

Resolution: None.

iLOEvents.0.9.FanDegraded

The fault tolerant fan condition has been set to degraded for the specified chassis and fan.

Severity: Critical

Resolution: Replace the failing fan.

iLOEvents.0.9.FanFailed

The fault tolerant fan condition has been set to failed for the specified chassis and fan.

Severity: Critical

Resolution: Replace the failed fan.

iLOEvents.0.9.FanInserted

A fault tolerant fan has been inserted into the specified chassis and fan location.

Severity: OK

Resolution: None.

iLOEvents.0.9.FanRedundancyLost

The fault tolerant fans have lost redundancy for the specified chassis.

Severity: Warning

Resolution: Check the system fans for a failure.

iLOEvents.0.9.FanRedundancyRestored

The fault tolerant fans have returned to a redundant state for the specified chassis.

Severity: OK

Resolution: None.

iLOEvents.0.9.FanRemoved

A fault tolerant fan has been removed from the specified chassis and fan location.

Severity: Warning

Resolution: None.

iLOEvents.0.9.FirmwareFlashStatusChanged

Cucm Demo License 11.5

The firmware flash status has changed

Severity: OK

Resolution: None.

iLOEvents.0.9.ILOToInsightRemoteSupportCommunicationFailure

iLO to Insight Remote Support or Insight Online communication failed.

Severity: Warning

Resolution: Please check the connectivity to Insight Remote Support or Insight Online Host.

iLOEvents.0.9.IndicatorLEDStateChanged

The state of the indicator LED has changed

Severity: OK

Resolution: None.

iLOEvents.0.9.MirroredMemoryEngaged

Advanced Memory Protection Mirrored Memory Engaged. The Advanced Memory Protection subsystem has detected a memory fault. Mirrored Memory has been activated.

Severity: Warning

Resolution: Replace the faulty memory.

iLOEvents.0.9.POSTErrorsOccurred

One or more POST errors occurred. Power On Self-Test (POST) errors occur during the server restart process. Details of the POST error messages can be found in Integrated Management Log

Severity: Warning

Resolution: Refer to the Integrated Management Log for details on the Power on self-test error.

iLOEvents.0.9.PowerRedundancyLost

The fault tolerant power supplies have lost redundancy for the specified chassis.

Severity: Warning

Resolution: Check the system power supplies for a failure.

iLOEvents.0.9.PowerRedundancyRestored

The fault tolerant power supplies have returned to a redundant state for the specified chassis.

Severity: OK

Resolution: None.

iLOEvents.0.9.PowerSupplyACPowerLoss

Power supply AC power loss for the specified chassis and bay location.

Severity: Critical

Resolution: Check the power source for the specified power supply.

iLOEvents.0.9.PowerSupplyDegraded

The fault tolerant power supply condition has been set to degraded for the specified chassis and bay location.

Severity: Critical

Resolution: Replace the failing power supply.

iLOEvents.0.9.PowerSupplyFailed

The fault tolerant power supply condition has been set to failed for the specified chassis and bay location.

Severity: Critical

Resolution: Replace the failed power supply.

iLOEvents.0.9.PowerSupplyInserted

A fault tolerant power supply has been inserted into the specified chassis and bay location.

Severity: OK

Resolution: None.

iLOEvents.0.9.PowerSupplyOK

The fault tolerant power supply condition has been set back to the OK state for the specified chassis and bay location.

Severity: OK

Resolution: None.

iLOEvents.0.9.PowerSupplyRemoved

A fault tolerant power supply has been removed from the specified chassis and bay location.

Severity: Warning

Resolution: None.

iLOEvents.0.9.ResourceAdded

Resource added.

Severity: OK

Resolution: None.

iLOEvents.0.9.ResourceRemoved

Resource removed.

Severity: OK

Resolution: None.

iLOEvents.0.9.ResourceStatusChanged

Resource status changed.

Severity: OK

Resolution: None.

iLOEvents.0.9.ResourceUpdated

Resource updated.

Severity: OK

Resolution: None.

iLOEvents.0.9.SNMPAuthenticationFailure

An unauthorized user attempted to access the iLO via SNMP

Severity: OK

Resolution: None.

iLOEvents.0.9.SecurityOverrideDisengaged

Security override disengaged. iLO firmware has detected the security override jumper has been toggled to the disengaged position.

Severity: OK

Resolution: None.

iLOEvents.0.9.SecurityOverrideEngaged

Security override engaged. iLO firmware has detected the security override jumper has been toggled to the engaged position.

Severity: OK

Resolution: None.

iLOEvents.0.9.ServerHardwareSignatureChanged

The server hardware signature has changed. This can be caused by addition or removal of Mezziane cards or relocation of the server.

Severity: OK

Resolution: None.

iLOEvents.0.9.ServerOperational

The server is operational again. The server has previously been shutdown due to a thermal anomaly on the server and has just become operational again.

Severity: Warning

Resolution: None.

iLOEvents.0.9.ServerPostComplete

The server has reached Power On Self Test complete.

Severity: OK

Resolution: None.

iLOEvents.0.9.ServerPowerOnFailure

Hp Ilo Demo License Previously Installed Version

A request was made to power on the server, however the server could not be powered on due to a failure condition.

Severity: Critical

Resolution: None.

iLOEvents.0.9.ServerPoweredOff

The server has been powered off.

Severity: OK

Resolution: None.

iLOEvents.0.9.ServerPoweredOn

The server has been powered on.

Severity: OK

Resolution: None.

iLOEvents.0.9.ServerResetDetected

Server Reset Detected. iLO firmware has detected a server reset.

Severity: Critical

Resolution: None.

piLOEvents.0.9.SystemBatteryFailed

The system battery condition has been set to failed for the specified chassis and index location.

Severity: Warning

Resolution: Replace the failed battery.

iLOEvents.0.9.SystemBatteryRemoved

The system battery condition has removed for the specified chassis and index location.

Severity: Warning

Resolution: None.

iLOEvents.0.9.ThermalStatusDegradedSysContinue

The temperature status has been set to degraded in the specified chassis and location. The server's temperature is outside of the normal operating range.

Severity: Critical

Resolution: Check the system for hardware failures and verify the environment is properly cooled.

iLOEvents.0.9.ThermalStatusDegradedSysShutdown

The temperature status has been set to degraded in the specified chassis and location. The server's temperature is outside of the normal operating range.

Severity: Critical

Resolution: Check the system for hardware failures and verify the environment is properly cooled.

iLOEvents.0.9.ThermalStatusOK

The temperature status has been set to ok in the specified chassis and location. The server's temperature has returned to the normal operating range.

Severity: OK

Resolution: None.

iLOEvents.0.9.UnauthorizedLoginAttempts

iLO firmware has detected multiple unauthorized login attempts.

Severity: OK

Resolution: Check the iLO log for more information on the login failure.

iLOEvents.0.9.iLOReset

iLO reset pending

Severity: OK

Resolution: None.

Base.0.10.AccountNotModified

The request was unable to modify the account.

Severity: Warning

Resolution: If the operation did not complete, check the authorization or the request body for issues and resubmit the request.

Base.0.10.AccountRemoved

The account was removed successfully.

Severity: OK

Resolution: None.

Printable version

Firmware Upgrade for HP ProLiant G6/G7 Lights-Out 100 Remote Management (For USB Key-Media)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Firmware - Management
Version:4.26 (A)(26 Jul 2013)
Operating System(s):
Microsoft Windows Server 2003
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 Small Business
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
OS Independent
Red Hat Enterprise Linux 4 (AMD64/EM64T)
Red Hat Enterprise Linux 4 (x86)
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (x86)
Solaris 10 for x86 Systems
VMware ESX/ESXi 4.0
VMware ESX/ESXi 4.1
VMware ESXi 5.0
Citrix XenServer 5.x
File name:SP62696.exe (5.9 MB)
This release provides updated firmware images for the latest releases of HP ProLiant G6/G7 Lights-Out 100 Remote Management.

Added new functionality to the Watchdog feature to ensure the fan curve is performing correctly and the network stack is available.

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

65315833fbf2d85cb6853d66885dc6c7SP62696.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:

USB Key - HPQUSB.exe - Windows-based utility to locally partition, format and copy necessary files to a USB flash media device (e.g. HP Drive Key) through the Windows environment. The created USB flash media device is made bootable and ready to locally restore and/or update the firmware.

1. Obtain a USB Key media.

2. Download the Enhanced SoftPaq to a directory on a system running Microsoft Windows 2000, Microsoft Windows Server 2003, Microsoft Windows Server 2008, Microsoft Windows XP, or Microsoft Windows Vista and change to that directory.

3. From that drive and directory, execute the downloaded SoftPaq file: Simply double click on the SPxxxxx file and follow the installation wizard to complete the Enhanced SoftPaq installation process. At the end of a successful installation of the Enhanced SoftPaq a web page will automatically appear to provide you with the different methods for restoring and/or upgrading the firmware on the system.

4. After the USB Key is created, you may delete the downloaded file if you wish.

5. Insert this USB Key into the USB Key port of the system to be updated and power the system on.

and power the system on.

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!
Deliverable Name:

Firmware Upgrade for HP ProLiant G6/G7 Lights-Out 100 Remote Management:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Release Version:

4.26

Last Recommended or Critical Revision:

4.25

Previous Revision:

4.25

Firmware Dependencies:

None

Enhancements/New Features:

Added new functionality to the Watchdog feature to ensure the fan curve is performing correctly and the network stack is available.

Problems Fixed:

Resolved an issue with false agent alerts during remote KVMS execution.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue with false agent alerts during remote KVMS execution.
Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!
Deliverable Name:

Firmware Upgrade for HP ProLiant G6/G7 Lights-Out 100 Remote Management:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Release Version:

4.26

Last Recommended or Critical Revision:

4.25

Previous Revision:

4.25

Firmware Dependencies:

None

Enhancements/New Features:

Added new functionality to the Watchdog feature to ensure the fan curve is performing correctly and the network stack is available.

Problems Fixed:

Resolved an issue with false agent alerts during remote KVMS execution.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Version:4.26 (A) (26 Jul 2013)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue with false agent alerts during remote KVMS execution.
Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Added new functionality to the Watchdog feature to ensure the fan curve is performing correctly and the network stack is available.


Version:4.25 (A) (24 Sep 2012)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

A specific SSL (secure sockets layer) error in rare circumstances can cause the LO100 firmware to become unresponsive.

Fixed an issue where the user cannot log into the KVMS (remote graphical keyboard/video/mouse) client using the web interface after 248 power-on days have elapsed.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.


Version:4.23 (A) (6 Mar 2012)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!
Firmware Dependencies:

None

Problems Fixed:

Resolved an issue where the full range of VLAN IDs could not be configured. The higher IDs were not allowed.

Resolved an issue where a false fan failure event could potentially power down systems that had been on for 497 days. This was a rare circumstance only seen on some systems.

Resolved an issue, which was caused by a memory leak, that could result in the Lights-Out 100 becoming unresponsive.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Added the capability to support longer DNS name lengths as specified in the DNS specification for remote Keyboard, Video, Mouse Switch (KVMS) functionality when not using the Lights-Out 100 DHCP DNS services.


Version:4.22 (A) (7 Apr 2011)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should not be flashed onto any other systems.

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the SDR update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue where warm IPMI reset watchdogs/exceptions were executing cold resets instead of warm resets.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

VLAN support can now be configured via new setup options in the web UI.

VLAN support has been added for shared NICs with low speed LO100 interfaces (ML110 G6, DL120 G6, ML150 G6).

Gratuitous ARP (address resolution protocol) support added for better DCMI compliance.

IPMI Serial-over-LAN (SOL) accumulate intervals were added for improved throughput with some network appliances.

IPMI Serial-over-LAN (SOL) break key support has been added.

Improved responsiveness of the UID light when the UID button is pressed.


Version:4.21(A) (16 Jul 2010)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should not be flashed onto any other systems.

HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40
HP ProLiant DL170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the SDR update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved several security issues where memory leaks could cause the BMC to lose network connectivity.

Resolved a security issue where a malformed packet could cause the BMC to reset and the system fans to go to maximum speed.

Resolved an issue where very cold operating temperatures could cause Lights-Out 100 to become unresponsive after a warm or cold reset command is sent to the BMC.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

The BMC now supports IPMI warm reset commands without requiring a system power cycle afterwards.


Version:4.20 (A) (5 May 2010)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should not be flashed onto any other systems.

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL160se G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the SDR update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue that always caused a redundancy lost message at bootup on systems that supported redundant power supplies or fans but did not have redundant power supplies or fans installed.

Resolved an issue with DCMI compliance by no longer indicating power management capable on hardware without power management capabilities.

Resolved an issue with the advanced license demo keys correctly displaying the days remaining when close to expiration.

Resolved a rare factory flash issue that could result in corrupting the BMC firmware during the flash. This issue has only been observed in rare circumstances during the manufacturing process.

Resolved an issue with systems capable of supporting redundant fans or power supplies, which could result in a web summary page health indication or IPMI chassis status indicating a failure when a redundant fan or power supply is not installed.

Resolved a web interface issue where the MAC address was not being accepted correctly in the PEF configuration webpage.

Resolved a problem where the -h and -x options at the end of a CLP Load command were not processed.

Resolved a remote graphical console issue for a text mode used in Solaris 9 that would cause formatting problems.

Resolved a remote graphical console issue for Red Hat 5 for an unsupported graphics mode that prevented viewing the remote OS boot process.

Resolved an issue that prevented the remote graphical console feature from starting when using SSL.

Known Issues:

None

For greater clarity, the following changes were made to the web sensor page:
Yellow indicators are used for critical thresholds and red indicators for non-recoverable events.
Redundant power supplies that are not installed now have green indicators.
Redundant power supplies and fans now show red if there are insufficient resources available.

Added support to allow special characters such as '&' or double quotes in LO100 passwords and user names.

Added support to allow user PEF events to be used while the HP health drivers are active.

Added support for DCMI power control commands on supported platforms with a Lights-Out 100 Advanced License.

Added improvements to reduce power consumption in some circumstances.

Added security enhancements to eliminate memory leaks in some circumstances.

Added support to the remote graphical console for Widescreen text and graphics modes.

Added support to remotely disable the UID LED if it is set by a physical button press.

Improved the web formatting display for Internet Explorer 8 and Firefox.


Version:4.06 (A) (10 Dec 2009)

Upgrade Requirement:

Critical -

HP requires users to update to this firmware version immediately.

Important Notes:

The firmware update, Version 4.06, contains critical bug fixes and is the minimum version required. Please perform this update immediately.

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue that allows LO100 to get an IP address from DHCP servers that do not respond to the DHCP renewal time option 58 request with a renewal time T1 value.

Resolved a security issue that could cause Lights-Out 100 to become non-responsive.

Resolved an issue with KVMS not initializing (no output) when http is disabled.

Increased the timeout values for the CLP Load command to help avoid aborted firmware flashes when using networks with high latency or heavy traffic.

Known Issues:

None
Improved temperature sensor discovery, get SEL record, and DHCP Host String discovery to be DCMI/IPMI compliant.

Version:4.04 (C) (1 Dec 2009)

HP ProLiant DL120 G6/DL160 G6/DL160se G6/DL180 G6/ML110 G6/ML150 G6/DL170h G6/DL2x170h G6/DL4x170h G6/SL160z G6/SL170z G6/SL2x170z G6 Lights-Out 100 Ver. 4.04
___________________________________________________________________________________________
Resolved various security issues that could cause Lights-Out 100 to become non-responsive.

Resolved an issue where systems using a low-speed shared NIC may not be assigned an IP address from Linux based DHCP servers.

The DNS naming feature has been disabled for connections through low-speed shared NICs (which cannot properly support it).

Resolved an issue where LO100 would not respond to ping requests if they came from a different subnet.

Resolved an issue where LO100 could return an error code with Internet Explorer 8 when multiple browser sessions were opened.

Resolved an issue with IPMITOOL power cycle commands where the system might not power cycle correctly in some situations.

Known Problems -

* It is possible for the user to disable all user accounts from the user administration screen.


Version:4.04(B) (22 Jul 2009)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

HP ProLiant DL160 G6/DL160se G6/DL180 G6/ML150 G6/DL170h G6/DL2x170h G6/DL4x170h G6/SL160z G6/SL170z G6/SL2x170z G6 Lights-Out 100 Ver. 4.04
___________________________________________________________________________________________
Resolved various security issues that could cause Lights-Out 100 to become non-responsive.

Resolved an issue where systems using a low-speed shared NIC may not be assigned an IP address from Linux based DHCP servers.

The DNS naming feature has been disabled for connections through low-speed shared NICs (which cannot properly support it).

Resolved an issue where LO100 would not respond to ping requests if they came from a different subnet.

Resolved an issue where LO100 could return an error code with Internet Explorer 8 when multiple browser sessions were opened.

Resolved an issue with IPMITOOL power cycle commands where the system might not power cycle correctly in some situations.

Known Problems -

* It is possible for the user to disable all user accounts from the user administration screen.


Version:4.03(B) (21 May 2009)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

HP ProLiant DL160 G6/DL180 G6/ML150 G6 Lights-Out 100 Ver. 4.03
__________________________________________________________
Improved status reporting of online flash updates through the CLP and web interface.

Resolved an issue where invalid links appeared in the UI when login attempts failed.

Resolved an issue where an IPMI command to change boot order is persistent only when requested.

Resolved an issue where very cold operating temperatures could cause Lights-Out 100 to become unresponsive.

Resolved an issue with graphics mode switching using Lights-Out 100 remote graphical console in Red Hat Enterprise Linux 5.

Resolved an issue where continuous login/logout of SSL connections would cause loss of network connectivity.

Resolved an issue where continuous mouse movement concurrent with heavy virtual floppy use would cause the mouse to become unresponsive.


Known Problems -

* It is possible for the user to disable all user accounts from the user administration screen.

* When using the low-speed shared NIC some Linux DHCP servers will not correctly provide an IP address to the shared NIC.

* LO100 will not respond to ping requests if they come from a different subnet.

HP ProLiant DL160 G6/DL180 G6/ML150 G6 Lights-Out 100 Ver. 4.03
__________________________________________________________
Added support for HP Systems Insight Manager License manager to retrieve and deploy licenses.

Added support for SmartStart Scripting Toolkit LO100cfg utility to replicate Lights Out 100 user settings.

Added support for widescreen graphics resolutions using LO100 remote graphical consoles.

Added ProLiant Onboard Adminstrator banner to web interface.


Type:Firmware - Management
Version:4.26 (A)(26 Jul 2013)
Operating System(s):
Citrix XenServer 5.x
Microsoft Windows Server 2003
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 Small Business
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
OS Independent
Red Hat Enterprise Linux 4 (AMD64/EM64T)
Red Hat Enterprise Linux 4 (x86)
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (x86)
Solaris 10 for x86 Systems
VMware ESX/ESXi 4.0
VMware ESX/ESXi 4.1
VMware ESXi 5.0

Description

This release provides updated firmware images for the latest releases of HP ProLiant G6/G7 Lights-Out 100 Remote Management.

Enhancements

Added new functionality to the Watchdog feature to ensure the fan curve is performing correctly and the network stack is available.

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

65315833fbf2d85cb6853d66885dc6c7SP62696.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:

USB Key - HPQUSB.exe - Windows-based utility to locally partition, format and copy necessary files to a USB flash media device (e.g. HP Drive Key) through the Windows environment. The created USB flash media device is made bootable and ready to locally restore and/or update the firmware.

1. Obtain a USB Key media.

2. Download the Enhanced SoftPaq to a directory on a system running Microsoft Windows 2000, Microsoft Windows Server 2003, Microsoft Windows Server 2008, Microsoft Windows XP, or Microsoft Windows Vista and change to that directory.

3. From that drive and directory, execute the downloaded SoftPaq file: Simply double click on the SPxxxxx file and follow the installation wizard to complete the Enhanced SoftPaq installation process. At the end of a successful installation of the Enhanced SoftPaq a web page will automatically appear to provide you with the different methods for restoring and/or upgrading the firmware on the system.

4. After the USB Key is created, you may delete the downloaded file if you wish.

5. Insert this USB Key into the USB Key port of the system to be updated and power the system on.

and power the system on.

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!
Deliverable Name:

Firmware Upgrade for HP ProLiant G6/G7 Lights-Out 100 Remote Management:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Release Version:

4.26

Last Recommended or Critical Revision:

4.25

Previous Revision:

4.25

Firmware Dependencies:

None

Enhancements/New Features:

Added new functionality to the Watchdog feature to ensure the fan curve is performing correctly and the network stack is available.

Problems Fixed:

Resolved an issue with false agent alerts during remote KVMS execution.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue with false agent alerts during remote KVMS execution.
Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Important

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!
Deliverable Name:

Firmware Upgrade for HP ProLiant G6/G7 Lights-Out 100 Remote Management:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Release Version:

4.26

Last Recommended or Critical Revision:

4.25

Previous Revision:

4.25

Firmware Dependencies:

None

Enhancements/New Features:

Added new functionality to the Watchdog feature to ensure the fan curve is performing correctly and the network stack is available.

Problems Fixed:

Resolved an issue with false agent alerts during remote KVMS execution.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Revision History

Version:4.26 (A) (26 Jul 2013)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue with false agent alerts during remote KVMS execution.
Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Added new functionality to the Watchdog feature to ensure the fan curve is performing correctly and the network stack is available.


Version:4.25 (A) (24 Sep 2012)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

A specific SSL (secure sockets layer) error in rare circumstances can cause the LO100 firmware to become unresponsive.

Fixed an issue where the user cannot log into the KVMS (remote graphical keyboard/video/mouse) client using the web interface after 248 power-on days have elapsed.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.


Version:4.23 (A) (6 Mar 2012)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should only be flashed onto the following systems:

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the Sensor Data Record (SDR) update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!
Firmware Dependencies:

None

Problems Fixed:

Resolved an issue where the full range of VLAN IDs could not be configured. The higher IDs were not allowed.

Resolved an issue where a false fan failure event could potentially power down systems that had been on for 497 days. This was a rare circumstance only seen on some systems.

Resolved an issue, which was caused by a memory leak, that could result in the Lights-Out 100 becoming unresponsive.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

Added the capability to support longer DNS name lengths as specified in the DNS specification for remote Keyboard, Video, Mouse Switch (KVMS) functionality when not using the Lights-Out 100 DHCP DNS services.


Version:4.22 (A) (7 Apr 2011)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should not be flashed onto any other systems.

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20
HP ProLiant SL160s G6 - O33
HP ProLiant SL165s G7 - O37
HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the SDR update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue where warm IPMI reset watchdogs/exceptions were executing cold resets instead of warm resets.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

VLAN support can now be configured via new setup options in the web UI.

VLAN support has been added for shared NICs with low speed LO100 interfaces (ML110 G6, DL120 G6, ML150 G6).

Gratuitous ARP (address resolution protocol) support added for better DCMI compliance.

IPMI Serial-over-LAN (SOL) accumulate intervals were added for improved throughput with some network appliances.

IPMI Serial-over-LAN (SOL) break key support has been added.

Improved responsiveness of the UID light when the UID button is pressed.


Version:4.21(A) (16 Jul 2010)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should not be flashed onto any other systems.

HP ProLiant DL170e G6 - O34
HP ProLiant SL170s G6 - O40
HP ProLiant DL170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37
HP ProLiant ML150 G6 - O21
HP ProLiant ML110 G6 - O27
HP ProLiant DL120 G6 - O26
HP ProLiant DL160se G6 - O20

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the SDR update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved several security issues where memory leaks could cause the BMC to lose network connectivity.

Resolved a security issue where a malformed packet could cause the BMC to reset and the system fans to go to maximum speed.

Resolved an issue where very cold operating temperatures could cause Lights-Out 100 to become unresponsive after a warm or cold reset command is sent to the BMC.

Known Issues:

It is possible for the user to disable all user accounts from the user administration screen.

The BMC now supports IPMI warm reset commands without requiring a system power cycle afterwards.


Version:4.20 (A) (5 May 2010)

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Important Notes:

This firmware has been tested and released only for the platforms listed below. This firmware should not be flashed onto any other systems.

HP ProLiant DL170h G6 - O34
HP ProLiant DL2x170h G6 - O34
HP ProLiant DL4x170h G6 - O34
HP ProLiant SL160z G6 - O33
HP ProLiant SL170z G6 - O34
HP ProLiant SL2x170z G6 - O34
HP ProLiant DL160 G6 - O33
HP ProLiant DL180 G6 - O20
HP ProLiant DL160se G6 - O20
HP ProLiant DL165 G7 - O37
HP ProLiant SL165z G7 - O37

Programming the LO100 firmware may take up to ten minutes to complete on some servers before the 'restart server' message is displayed. When the server is restarted, it may take up to an additional seven minutes during the Power-On Self-Test (POST) for the System BIOS to perform the SDR update process and for the LO100 re-initialization to complete. Do NOT interrupt this programming process!

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue that always caused a redundancy lost message at bootup on systems that supported redundant power supplies or fans but did not have redundant power supplies or fans installed.

Resolved an issue with DCMI compliance by no longer indicating power management capable on hardware without power management capabilities.

Resolved an issue with the advanced license demo keys correctly displaying the days remaining when close to expiration.

Resolved a rare factory flash issue that could result in corrupting the BMC firmware during the flash. This issue has only been observed in rare circumstances during the manufacturing process.

Resolved an issue with systems capable of supporting redundant fans or power supplies, which could result in a web summary page health indication or IPMI chassis status indicating a failure when a redundant fan or power supply is not installed.

Resolved a web interface issue where the MAC address was not being accepted correctly in the PEF configuration webpage.

Resolved a problem where the -h and -x options at the end of a CLP Load command were not processed.

Resolved a remote graphical console issue for a text mode used in Solaris 9 that would cause formatting problems.

Resolved a remote graphical console issue for Red Hat 5 for an unsupported graphics mode that prevented viewing the remote OS boot process.

Resolved an issue that prevented the remote graphical console feature from starting when using SSL.

Known Issues:

None

For greater clarity, the following changes were made to the web sensor page:
Yellow indicators are used for critical thresholds and red indicators for non-recoverable events.
Redundant power supplies that are not installed now have green indicators.
Redundant power supplies and fans now show red if there are insufficient resources available.

Added support to allow special characters such as '&' or double quotes in LO100 passwords and user names.

Added support to allow user PEF events to be used while the HP health drivers are active.

Added support for DCMI power control commands on supported platforms with a Lights-Out 100 Advanced License.

Added improvements to reduce power consumption in some circumstances.

Added security enhancements to eliminate memory leaks in some circumstances.

Added support to the remote graphical console for Widescreen text and graphics modes.

Added support to remotely disable the UID LED if it is set by a physical button press.

Improved the web formatting display for Internet Explorer 8 and Firefox.


Version:4.06 (A) (10 Dec 2009)

Upgrade Requirement:

Critical -

HP requires users to update to this firmware version immediately.

Important Notes:

The firmware update, Version 4.06, contains critical bug fixes and is the minimum version required. Please perform this update immediately.

Firmware Dependencies:

None

Problems Fixed:

Resolved an issue that allows LO100 to get an IP address from DHCP servers that do not respond to the DHCP renewal time option 58 request with a renewal time T1 value.

Resolved a security issue that could cause Lights-Out 100 to become non-responsive.

Resolved an issue with KVMS not initializing (no output) when http is disabled.

Increased the timeout values for the CLP Load command to help avoid aborted firmware flashes when using networks with high latency or heavy traffic.

Known Issues:

None
Improved temperature sensor discovery, get SEL record, and DHCP Host String discovery to be DCMI/IPMI compliant.

Version:4.04 (C) (1 Dec 2009)

HP ProLiant DL120 G6/DL160 G6/DL160se G6/DL180 G6/ML110 G6/ML150 G6/DL170h G6/DL2x170h G6/DL4x170h G6/SL160z G6/SL170z G6/SL2x170z G6 Lights-Out 100 Ver. 4.04
___________________________________________________________________________________________
Resolved various security issues that could cause Lights-Out 100 to become non-responsive.

Resolved an issue where systems using a low-speed shared NIC may not be assigned an IP address from Linux based DHCP servers.

The DNS naming feature has been disabled for connections through low-speed shared NICs (which cannot properly support it).

Resolved an issue where LO100 would not respond to ping requests if they came from a different subnet.

Resolved an issue where LO100 could return an error code with Internet Explorer 8 when multiple browser sessions were opened.

Resolved an issue with IPMITOOL power cycle commands where the system might not power cycle correctly in some situations.

Known Problems -

* It is possible for the user to disable all user accounts from the user administration screen.


Version:4.04(B) (22 Jul 2009)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

HP ProLiant DL160 G6/DL160se G6/DL180 G6/ML150 G6/DL170h G6/DL2x170h G6/DL4x170h G6/SL160z G6/SL170z G6/SL2x170z G6 Lights-Out 100 Ver. 4.04
___________________________________________________________________________________________
Resolved various security issues that could cause Lights-Out 100 to become non-responsive.

Resolved an issue where systems using a low-speed shared NIC may not be assigned an IP address from Linux based DHCP servers.

The DNS naming feature has been disabled for connections through low-speed shared NICs (which cannot properly support it).

Resolved an issue where LO100 would not respond to ping requests if they came from a different subnet.

Resolved an issue where LO100 could return an error code with Internet Explorer 8 when multiple browser sessions were opened.

Resolved an issue with IPMITOOL power cycle commands where the system might not power cycle correctly in some situations.

Known Problems -

* It is possible for the user to disable all user accounts from the user administration screen.


Version:4.03(B) (21 May 2009)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

HP ProLiant DL160 G6/DL180 G6/ML150 G6 Lights-Out 100 Ver. 4.03
__________________________________________________________
Improved status reporting of online flash updates through the CLP and web interface.

Resolved an issue where invalid links appeared in the UI when login attempts failed.

Resolved an issue where an IPMI command to change boot order is persistent only when requested.

Resolved an issue where very cold operating temperatures could cause Lights-Out 100 to become unresponsive.

Resolved an issue with graphics mode switching using Lights-Out 100 remote graphical console in Red Hat Enterprise Linux 5.

Resolved an issue where continuous login/logout of SSL connections would cause loss of network connectivity.

Resolved an issue where continuous mouse movement concurrent with heavy virtual floppy use would cause the mouse to become unresponsive.


Known Problems -

* It is possible for the user to disable all user accounts from the user administration screen.

* When using the low-speed shared NIC some Linux DHCP servers will not correctly provide an IP address to the shared NIC.

* LO100 will not respond to ping requests if they come from a different subnet.

HP ProLiant DL160 G6/DL180 G6/ML150 G6 Lights-Out 100 Ver. 4.03
__________________________________________________________
Added support for HP Systems Insight Manager License manager to retrieve and deploy licenses.

Added support for SmartStart Scripting Toolkit LO100cfg utility to replicate Lights Out 100 user settings.

Added support for widescreen graphics resolutions using LO100 remote graphical consoles.

Added ProLiant Onboard Adminstrator banner to web interface.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.